Controlling a Syringe pump from a PC

 All of our syringe pumps can be controlled from a PC over USB or RS232, depending on the model.

They can be controlled by sending them  'Pump Chain' commands (plain ASCII) from any application that can send plain text out through a COM port (such as Labview, MATlab, Python or even a terminal emulator)

The list of available commands for the Legato:

• Legato user Commands.pdf
      

The list of available commands for the Gemini 88+ is in the back of the manual:

• Gemini 88Plus REV1 PDF.pdf
     

The list of available commands for the KDS 200 legacy pump is in the back of the manual:

• KDS_Model_200_Manual_REV G.pdf
     

nb: the KDS 200 requires a special RS232 cable (part 780223), that is only available from KDS